Three input selector switch.
--100K Alps volume control.
--Two pairs of line outputs.
--External low noise toroid power transformer, with 4-foot detachable umbilical cord.
--Hand wired point to point, no printed circuit boards. Inductor LC power supply filters with polypropylene capacitors.
--Conservatively operated vacuum tubes. Source output resistance 12 ohms. Will drive hundreds of feet of line level cable.
--Recommended headphone load 8 to 600 ohms!
Power Bandwidth:
_Driving Sen HD 600s L mode: -.5dB 1Hz to 135kHz
H mode: -5dB 5Hz to 60kHz
_Power Output: L/H 650 mW
_Driving Grado RS1s L mode: -5dB 10Hz to 110kHz
H mode: -5dB 30Hz to 60 kHz
_Power Output: L: 500mW/ H 150mW
--Source Resistance: L=3ohms/ H=12ohms
--Gain: L=8dB/ H=18dB
--Wide band noise less than 250uV
--Dimensions: 12” wide by 14” deep by 9” high. 14 lbs.
--Tubes included: 2 6D22S rectifier, 1 6SL7 driver, and 2 6C33C-B power triodes.
Price: $2200.00 plus shipping
If you would like to order a Zana Deux please email cuthus@charter.net after reading the attached PDF
Read the review of the Zana Deux:
"...with my listening experience, the Eddie Current Zana Deux is the finest performing single-ended headphone amp to ever seduce my ears." Ryan Clarin, six moons.
To see full review,
http://www.6moons.com/audioreviews/eddiecurrent2/zana2.html
For reviews or an opportunity to listen to the ZDse or other Eddie Current products, contact Craig Uthus at cuthus@charter.net or (818) 224-3782.
COPYRIGHT © 2006 Eddie Current